学习工作经历

1993.9-1997.9   昆明理工大学热加工工艺及设备专业学习，获学士学位；

1997.9-2000.5 昆明理工大学材料加工工程专业学习，获硕士学位；

2000.9-2003.6 公司材料加工工程专业学习，获博士学位；

2003.6- 2005.9 全网十大靠谱网投(中国)有限公司讲师。

2004.6-2006.7   公司冶金工程博士后流动站在职博士后；

2005.9- 2009.9  全网十大靠谱网投(中国)有限公司副教授。

2006.9-2007.8  芬兰赫尔辛基工业大学访问学者。

2009.9-至今 全网十大靠谱网投(中国)有限公司教授。

2017.12-2018.4  美国北卡罗来纳州立大学访问学者

社会兼职

中国材料学会镁分会理事

中国有色金属学会新能源材料发展工作委员会委员

重庆材料学会理事

主讲课程

1.本科生课程：轧制成形设备、材料设计

2.研究生课程：镁合金塑性加工理论与技术

主要研究方向

1.镁合金塑性成形理论与技术

2.镁二次电池及关键材料

科研项目

参加了国家重点研发计划、国家自然科学基金、国家863高科技计划、国家科技攻关、重庆市公司攻关项目等20余项。发表学术论文150余篇，其中SCI/EI收录120余篇左右。授权发明专利14项。

论文及专著

1. Shuaishuai Liu，Weizhang Wang，Xiang Chen，Guangsheng Huang，Han Liu，Aitao Tang，Bin Jiang，Fusheng Pan. Enhanced strength and ductility AZ91 alloy with heterogeneous lamella structure prepared by pre-aging and low-temperature extrusion. Materials Science and Engineering: A, 812 (2021) 141094.

2. Junlei Zhang, Xiang Chen, Shuaishuai Liu, Guangsheng Huang, Bin Jiang, AitaoTang, Fusheng Pan. Non-uniform deformation behavior of dissimilar friction stir welded AM60/AZ31 joint and its influence on fracture. Materials Science and Engineering A, 800 (2021) 140318

3. Junlei Zhang, Ke Liu, Guangsheng Huang, Xiang Chen, Dabiao Xia, Bin Jiang, Aitao Tang, Fusheng Pan. Optimizing the mechanical properties of friction stir welded dissimilar joint of AM60 and AZ31 alloys by controlling deformation behavior. Materials Science and Engineering A, 773 (2020) 138839

4. Junlei Zhang, Xiang Chen, Dabiao Xia, Guangsheng Huang , Aitao Tang，Bin Jiang, Fusheng Pan. Improving performance of friction stir welded AZ31/AM60 dissimilar joint by adjusting texture distribution and microstructure. Materials Science and Engineering A, 778 (2020) 139088

5. Junlei Zhang, Han Liu, Yulu Xie, Guangsheng Huang, Xiang Chen, Bin Jiang, Aitao Tang, Fusheng Pan. Microstructure distribution and tensile anisotropy of dissimilar friction stir welded AM60 and AZ31 magnesium alloys. Acta Metallurgica Sinica (English Letters), 33(2020)1487–1504)

6. Junlei Zhang, Yu Huang, Jin Xiang, Guangsheng Huang, Xiang Chen, Hu Zhou, Bin Jiang, Aitao Tang, Fusheng Pan. Characterization of newly developed friction stir-arc welding method for AM60/AZ31 dissimilar Mg alloy. Materials Science and Engineering A, 800 (2021) 140320

7. Dabiao Xia , Junlei Zhang, Xiang Chen, Guangsheng Huang, Bin Jiang, Aitao Tang, Sarkis Gavras, Yuanding Huang, Norbert Hort, Fusheng Pan. Effect of biaxial compressive stress state on the microstructure evolution and deformation compatibility of rolled sheet Mg alloy AZ31 at room temperature. Materials Science and Engineering A，789 (2020) 139599

8. Shuaishuai Liu, Junlei Zhang, Xiang Chen, Guangsheng Huang, Dabiao Xia, Aitao Tang, Yuntian Zhu, Bin Jiang, Fusheng Pan. Improving mechanical properties of heterogeneous Mg-Gd alloy laminate via accumulated extrusion bonding. Materials Science and Engineering A, 785 (2020) 139324

9. Xiang Chen, Junlei Zhang, Dabiao Xia, Guangsheng Huang, Ke Liu, Bin Jiang, Aitao Tang, Fusheng Pan. Microstructure and mechanical properties of 1060/7050 laminated composite produced via cross accumulative extrusion bonding and subsequent aging. Journal of Alloys and Compounds, 826 (2020) 154094

10. Xiang Chen, Dabiao Xia, Junlei Zhang, Guangsheng Huang, Ke Liu, Aitao Tang, Bin Jiang, Fusheng Pan. Ultrafine-grained Al–Zn–Mg–Cu alloy processed via cross accumulative extrusion bonding and subsequent aging: Microstructure and mechanical properties. Journal of Alloys and Compounds, 846 (2020) 156306

11. Xiang Chen, Shuaishuai Liu, Ke Liu, Guangsheng Huang, Junlei Zhang, Aitao Tang, Bin Jiang, Fusheng Pan. Extra strengthening and strain hardening in coarse-grain/ultrafine-grain laminates. Materials Letters, 272(2020)127858

12. Dabiao Xia, Guangsheng Huang, Shuaishuai Liu, Aitao Tang,Serge Gavrasd,Yuanding Huang, Norbert Hort, Bin Jiang, Fusheng Pan. Microscopic deformation compatibility during biaxial tension in AZ31 Mg alloy rolled sheet at room temperature. Materials Science and Engineering A, 756,(2019):1-10.

13. Junlei Zhang, Guangsheng Huang, Shuaishuai Liu, Yulu Xie, Guangang Wang, Bin Jiang, Aitao Tang, Fusheng Pan. Microstructure evolution and mechanical properties of friction stir welded dissimilar joints of as-extruded AM60 and AZ31 alloys. Materials Science and Engineering A, 759 (2019) 479–489

14. Tingzhuang Han, Guangsheng Huang, Qianyuan Deng, Guangang Wang, Bin Jiang, Aitao Tang, Yuntian Zhu, Fusheng Pan. Grain refining and mechanical properties of AZ31 alloy processed by accumulated extrusion bonding. Journal of Alloys and Compounds, 2018, 745: 599-608.

15. Zhao Yanchun, Huang Guangsheng, Zhang Cheng, Chen Lin, HanTing huan, Pan Fusheng. Effect of Texture on the Performance of Mg-air Battery Based on Rolled Mg-3Al-1Zn Alloy Sheet.Rare Metal Materials and Engineering, 2018, 47(4): 1064-1068.

16. Ting Zhuang Han, Guang Sheng Huang, Lun Huang, Bin Jiang, Guan-Gang Wang, Ai-Tao Tang, Fu-Sheng Pan. Influence of Continuous Bending Process on Texture Evolution and Mechanical Properties of AZ31 Magnesium Alloy. Acta Metallurgica Sinica (English Letters), 2018, 31(3): 225-233

17. Guilin Gong, Guangsheng Huang, Lun Huang, Fusheng Pan, Bin Jiang. Effect of compressive deformation on wear property of extruded ZK60 magnesium alloy. Tribology Transactions, 2018, 1-7.

18. Dabiao Xia，Guangsheng Huang，Qianyuan Deng，Bin Jiang，Shuaishuai Liu，Fusheng Pan. Influence of stress state on microstructure evolution of AZ31 Mg alloy rolled sheet during deformation at room temperature. Materials Science and Engineering A，2018，715：397-388.

19. Guangang Wang, Guangsheng Huang, Xiang Chen, Qianyuan Deng, Aitao Tang, Bin Jiang, Fusheng Pan.Effects of Zn addition on the mechanical properties and texture of extruded Mg-Zn-Ca-Ce magnesium alloy sheets. Materials Science andEngineering A，2017，705：46-54.

20. Ding kai Liu, Guangsheng Huang, Guilin GongG, Guangang Wang, Fusheng Pan. Influence of different rolling routes on mechanical anisotropy and formability of commercially pure titanium sheet. Trans. Nonferrous Met. Soc. China，2017，27：1306−1312

21. Lin Chen, Guangsheng Huang, Cheng Zhang, Dabiao Xia, Yanchun Zhao, Fusheng Pan. Corrosion Behaviors and Mechanical properties of Fe/Mg-8Al-1Zn matrix Composite. Materials Science and Technology. 2017, 33(11): 1312–1318.

22. YanChun Zhao, GuangSheng Huang, Guilin Gong, TingZhuang Han, DaBiao Xia, FuSheng Pan. Improving the Intermittent Discharge Performance of Mg–Air Battery by Using Oxyanion Corrosion Inhibitor as Electrolyte Additive. Acta Metallurgica Sinica, 2016, 29(11):1019–1024.

23. Lifei Wang, Hua Zhang, Guangsheng Huang, Miao Cao, Xiaoqing Cao, Ehsan Mostaed , Maurizio Vedani. Formability and anisotropy of the mechanical properties in commercially pure titanium after various routes normal and different speed rolling. Journal of Materials Research. 2016,31(21): 3372-3380.

24. Tingzhuang Han, Guangsheng Huang, Yougen Wang, Guangang Wang，Yanchun Zhao, Fusheng Pan. Microstructure and formability evolution of AZ31 magnesium alloy sheets undergoing continuous bending process. Transactions of Nonferrous Metals Society of China. 2016,26(8): 2043–2050.

25. Yougen Wang, Guangsheng Huang , Dingkai Liu, Lin Chen, Tingzhuang Han, Jian Peng, Fusheng Pan. Influence of blank holder type on the drawability of 5182-O aluminum sheet at room temperature. Transactions of Nonferrous Metals Society of China.2016, 26(5): 1251-1258

26. Yanchun Zhao, Guangsheng Huang, Dingkai Liu, Tingzhuang Han, Fusheng Pan. Effect of Na 2 SO 4 on the Performance of Mg-air Battery. Materials Science Forum, 2016，847：46-49.

27. Tingzhuang Han, Guangsheng Huang, Yougen Wang, Guangang Wang, Yanchun Zhao, Fusheng Pan. Enhanced mechanical properties of AZ31 magnesium alloy sheets by continous bending process after V-bending. Progress in Natural Science: Materials International, 2016，26：97-102.

28. Lifei Wang, Ehsan Mostaed, Xiaoqing Cao, Guangsheng Huang, Alberto Fabrizi, Franco Bonollo, Chengzhong Chi, Maurizio Vedani. Effects of texture and grain size on mechanical properties of AZ80 magnesium alloys at lower temperatures. Materials and Design Volume 89, 5 January 2016, Pages 1–8.

授权专利

1. 潘复生, 黄光胜, 韩廷状, 王冠刚, 王游根；一种连续弯曲改善镁合金薄板冲压性能的方法. 中国发明专利，申请号：201510332444.X，申请日：2015-06-16. 公开号：104862627A, 公开日：2015-08-26. 授权号：CN 104862627 B，授权日：2016-08-24.

2. 黄光胜, 陈琳, 夏大彪, 刘定凯, 赵炎春, 潘复生；一种含铁镁基复合材料及其制备方法和应用. 中国发明专利，申请号：201510701085.0，申请日：2015-10-26. 公开号：105177383A, 公开日：2015-12-23. 授权号：CN 105177383 B，授权日：2017-10-31.

3. 黄光胜, 潘复生, 韩廷状, 张诚, 王冠刚, 赵炎春；一种板材剧烈塑性变形的累积挤压装置及其使用方法. 中国发明专利，申请号：201610457467.8，申请日：2016-06-22. 公开号：106064181A，公开日：2016-11-02. 授权号：CN 106064181 B，授权日：2018-07-31.

4. 潘复生, 黄光胜, 邓钱元, 夏大彪, 陈祥；一种金属熔体的净化装置. 中国发明专利，申请号：201710366670.9, 申请日：2017-05-23. 公开号：107012334A, 公开日：2017-08-04. 授权号：CN 107012334 B，授权日：2018-09-11.

5. 黄光胜, 夏大彪, 陈琳, 潘复生；一种简易的、拉伸比例可调式双轴同步拉伸装置及方法；中国发明专利，申请号：201610107468.X，申请日：2016-02-26. 公开号：105758722A.授权号：CN 105758722 B，授权日：2019-05-17.

6. 黄光胜, 夏大彪, 刘帅帅, 谢誉璐, 潘复生. 一种双向压缩提高板材成形性能的方法及装置. 中国发明专利，申请号：201810048902.0, 申请日：2018-01-18. 公开号：1 08265248A, 公开日：2018-07-10. 授权号：CN 108265248 B，授权日：2019-12-13.

7. 黄光胜, 夏大彪, 谢誉璐, 刘帅帅, 潘复生. 一种比例可调双向同步压缩实验原位观察装置. 中国发明专利，申请号：201810048882.7, 申请日：2018-01-18. 公开号：108225917A, 公开日：2018-06-29. 授权号：CN 108225917 B，授权日：2020-09-15.

表彰及奖励

获省部级一等奖4项。

科研团队

国家镁合金材料工程技术研究中心